Neilpryde se rozhodl taky vyvinout svoje křídlo a musíme říct povedlo se jim to. Neilpryde se zaměřuje na vysokou kvalitu svých výrobků a spolupracuje s profesionálními jezdci, aby zlepšoval své výrobky pro co nejlepší zážitek z jízdy.
Detailní popis produktu
|
VENTED STRUT The large opening between the LE and the front of the fill panel (which connects the canopy to the strut) allows the pressure to equalize across the two sides of the wing. This improves overall performance and makes the wing even more stable. |
 |
 |
HIGH LIFT CONCEPT Due to the highly refined LE geometry and entry shaping, each wing produces the maximum thrust (power and acceleration) for its size. This dramatically increases the range, allowing riders to use a smaller wing than is typical in each set of conditions. The result is easier handling and greater maneuverability. |
|
HIGH TENSION CANOPY WITH STRUCTURED CAMBER LENS The 3D shape of the canopy leading edge is defined by a series of transverse panels that converge at the wingtips. This leverages the LE Tube structure to maximize tension in the critical entry sections – the result is more lift and a higher stall angle for better acceleration in light winds, and the ability to fly efficiently at low angles of attack for better control and higher top speeds in strong winds. |
 |
INNOVATION
Designed and tested at our NeilPryde Maui Design Center by Nils Rosenblad, former NeilPryde Windsurfing sail designer and America's Cup engineer, then further developed through our team's feedback from across the world. No stone is left uncovered in our relentless drive to be the best at what we do.
DESIGN FEATURES
High Lift Coefficient Concept
Due to the highly refined LE geometry and entry shaping, each wing produces the maximum thrust (power and acceleration) for its size. This dramatically increases the range, allowing riders to use a smaller wing than is typical in each set of conditions. The result is easier handling and greater maneuverability.
Modified delta Planform
This creates a more efficient LE shape and an elliptical spanwise lift distribution for better upwind performance and control.
Dihedral Front Profile
The dihedral angle allows higher aspect ratios due to increased wingtip clearance. It also makes the wing very roll stable, especially when flagging.
Low Drag Wingtips with Linear Washout
The small LE diameter at the wingtips reduces drag and allows dynamic twist. This improves low end acceleration during pumping as well as control when powered up.
Vented Strut
The large opening between the LE and the front of the fill panel (which connects the canopy to the strut) allows the pressure to equalize across the two sides of the wing. This improves overall performance and makes the wing even more stable.
WING SIZE RECOMMENDATION
As our high lift coefficient allows you to use a significantly smaller wing in any given conditions, please use this guide to appropriately size your wing to your usual riding conditions.
| Rider Weight | 40-60kg | 60-85kg | 85-100kg + |
| 30-40+ kts | 1.4m² | 1.8 -2.2m² | 2.5 - 2.9m² |
| 25-35 kts | 1.4 - 1.8m² | 1.8 -2.5m² | 2.9 - 3.6m² |
| 20-30 kts | 1.8 - 2.2m² | 2.5 -3.3m² | 3.6 - 4.3m² |
| 16-25 kts | 2.2 - 2.9m² | 3.3 - 4.0m² | 4.3 - 5.0m² |
| 12-20 kts | 2.9 - 3.6m² | 4.0 - 4.7m² | 5.0 - 6.0m² |
| 8-15 kts | 3.6 - 4.3m² | 4.7 - 5.7m² | 6.0m²* |
*Min recommended wind for 100kg+ rider weight = 10 - 12kts
WING SPECS
| Velikost | Okno | LE tlak | Spírá tlak | Délka leashe |
|---|---|---|---|---|
| m² | PSI | PSI | mm | |
| 1.4 | 1 Piece Window | 10 | 10 | 1000 |
| 1.8 | 1 Piece Window | 10 | 10 | 1000 |
| 2.2 | 1 Piece Window | 9.5 | 9.5 | 1000 |
| 2.5 | 2 Piece Window | 9.5 | 9.5 | 1000 |
| 2.9 | 2 Piece Window | 9 | 9 | 1000 |
| 3.3 | 2 Piece Window | 9 | 9 | 1200 |
| 3.6 | 2 Piece Window | 9 | 9 | 1200 |
| 4.0 | 2 Piece Window | 8.5 | 8.5 | 1200 |
| 4.3 | 2 Piece Window | 8.5 | 8.5 | 1200 |
| 4.7 | 2 Piece Window | 8.5 | 8.5 | 1200 |
| 5.0 | 2 Piece Window | 8 | 8.5 | 1400 |
| 5.4 | 2 Piece Window | 8 | 8.5 | 1400 |
| 5.7 | 2 Piece Window | 7.5 | 8 | 1400 |
| 6.0 | 2 Piece Window | 7.5 | 8 | 1400 |
Doplňkové parametry
| Kategorie: | Pevná ráhna1.4m² |
|---|---|
| Typ: | Freeride - volná jízda, Freestyle - skoky a triky, Wave |
| Rok výroby: | 2023 |
| ? Barva: | červená |
| Průhledné okna: | Ano |
| #sizes_table#: | hidden |
INTRODUCING THE FLY
MEET THE FLY
Buďte první, kdo napíše příspěvek k této položce.
Jak ve vývoji plachet pro windsurfing, tak ve vývoji vodního oblečení a doplňků vyrobených pro Wind-Watersports, NEILPRYDE vybudoval dědictví v posledních desetiletích a pokračuje v tom. Společnost NEILPRYDE, založená na vášni pro plachtění, nezaložil nikdo menší než muž jménem Neil Pryde – vášnivý námořník, který založil svou firmu na vývoj jachtařských plachetnic. Na začátku 70. let se rozhodl změnit své podnikání a zaměřit se na výrobu plachet pro trendy a nadcházející sporty windsurfing. Zatímco zpočátku ještě vyráběl plachty pro jiné značky, brzy se rozhodl založit vlastní značku windsurfingových plachet, což znamenalo začátek NEILPRYDE Windsurfingu.